Eicon Networks 1530 - Manual (Page 156)

Command Line Interface 156
SHOW X25 TRACE [mask [memsize [framesize]]]
Starts an X.25 trace, or displays an active X.25 trace.
mask:
01 = Data packets
02 = RR, RNR packets
04 = Reset, Interrupt packets
08 = Call, Clear packets
10 = All other packets
memsize: RAM reserved to store the trace on the Eicon 1530. Range: 1-63 KB.
Default: 16 KB.
framesize: Number of characters to show for each frame.
Note: Note: If entered 0 or nothing the default value will be used.
STOP X25 TRACE
Stops an active X.25 trace.
SHOW X25 CONFIGURATION
Displays X.25 configuration settings.