Eicon Networks 1530 - Manual (Page 150)

Command Line Interface 150
Time Protocol Commands
SET TIMEPROTOCOL SERVER timeServer
Defines the IP address of the time server the Eicon 1530 should use when automatically
updating its internal clock. The address 255.255.255.255 will broadcast the request to all
stations on the network.
SET TIMEPROTOCOL ZONE timeZoneDiff
Defines the difference between your time zone and Greenwich Mean Time (GMT) in hours.
Range: -12 to 12. Default: 0.
ENABLE TIMEPROTOCOL
DISABLE TIMEPROTOCOL
Enables/disables the use of the time protocol. When enabled, the Eicon 1530 will periodically
contact a time server in order to set its internal clock.
Default: Enabled.
SHOW TIMEPROTOCOL CONFIGURATION
Displays the time protocol configuration settings.