Eicon Networks 1530 - Manual (Page 62)

Web Interface Settings Glossary 62
System Menu
System Name
Sets the domain name of the Eicon 1530. This is also the address of the home page of the
web-based configuration interface. The text ‘.wanrouter’ is appended to the name you enter.
Range: 1-64 characters, no spaces. Default: eicon1530 (‘eicon1530.wanrouter’).
Login Password
Defines the password that users need to specify when logging on. The password is
case-sensitive, which means ‘PASS’ and ‘pass’ are not the same.
Range: 0-11 characters, no spaces. Default: none (no password required to log in).
Repeat Login Password
For verification, repeat the password you entered in the ‘Login Password’ field. The password
will only be changed if both fields match.
Enable Remote Management
When enabled, allows remote computers to connect to the Eicon 1530 and access its
configuration interfaces. A remote computer is considered to be any computer that is not on the
local LAN. It is strongly recommended that you define a system password if you enable this
option.
Set Time
Sets the internal system clock.
Set Date
Sets the internal system date, in yyyy-mm-dd format.
Get Time and Date button
Gets the time and date from your computer’s clock.
Log Output
Remote IP Address
Sends event log information to the specified device. Choices:
• Disabled: Stops display of event log output, but does not stop recording of event log data.
• Send to Remote: The remote devices must implement a UNIX-compatible syslogd protocol
to successfully receive event log messages. When this setting is selected, you must also enter
the IP address of the remote device.