Upgrading firmware via a web browser – Eicon Networks 1530 User Manual
Page 35
Using your Eicon 1530
35
Upgrading Firmware via a Web Browser
Eicon Networks posts the latest Eicon 1530 firmware on its web site. You can automatically
update your Eicon 1530 to the latest version using the web configuration interface.
Note: Configuration settings are normally preserved during firmware updates. However, if you wish to make
a backup of your configuration before upgrading, see
Saving and Resetting Configuration Settings
Procedure
1.
Log in to the Eicon 1530 as described in
Accessing the Configuration Menu
2.
From the main menu, click ‘Maintenance’.
The maintenance menu appears with two options, ‘Firmware’ and ‘Configuration’.
3.
Click ‘Firmware’ to display the ‘Firmware Maintenance’ page.
4.
To save a copy of the Eicon 1530’s current firmware to disk, click ‘Backup’. This is done in
case you encounter problems installing or using the new firmware.
To upgrade the firmware, click the ‘Browse’ button, then select the new firmware file. When
complete, the Eicon 1530 is automatically reset to activate the new firmware.