Eicon Networks 1530 - Manual (Page 80)

Web Interface Settings Glossary 80
LAN Menu
IP Address
Defines the IP address for the Eicon 1530 on the Ethernet LAN it creates. By default, this
address is set to 192.168.1.1, and you should not change it. However, if you are installing the
Eicon 1530 on an existing LAN, you may need to change this value so that it is appropriate for
your LAN setup.
Subnet Mask
Defines the subnet mask for the Eicon 1530 on the Ethernet LAN it creates.
Default: 255.255.255.0.
Broadcast Enable
Enables/disables support for IP broadcasting.
Default: Disabled.
Multicast Enable
Enables/disables support for IP multicasting.
When disabled, IP multicast datagrams are not forwarded from the external network onto the
internal Ethernet LAN. To allow computers on the internal LAN to subscribe to services that
use IP multicasting as a delivery mechanism, you must enable this option.
Default: Enabled.