Changing the vhsi port protocol – Eicon Networks 1530 User Manual
Page 37
Using your Eicon 1530
37
Changing the VHSI Port Protocol
The Eicon 1530 uses profiles to make individual connections. However, the connection profiles
depend on the protocol chosen for the VHSI port. When you change the VHSI port protocol, all
profiles associated with that protocol are erased. Therefore, it is very important to select the
VHSI port protocol first, before creating or modifying connection profiles.
If you sometimes need to use different VHSI port protocols, use the configuration backup and
restore feature as described in
Saving and Resetting Configuration Settings
Procedure
1.
Log in to the Eicon 1530 as described in
Accessing the Configuration Menu
2.
From the main menu, click ‘Protocol’.
Note: The ‘Protocol’ link is part of the VHSI Port group of protocols. If you do not see ‘Protocol’, click
on the small ‘+’ next to ‘VHSI Port’ to expand the VHSI Port subgroup.
3.
The ‘Protocol’ page appears. By default, the protocol is set to X.25.
‘Protocol’
setting