Eicon Networks 1530 - Manual (Page 148)

Command Line Interface 148
SNMP Commands
SET SNMP NAME name
Defines a name for the Eicon 1530. This information can be retrieved by SNMP agents.
Range: 1-29 characters.
Default: Eicon 1530 WAN Router.
SET SNMP DESCRIPTION name
Defines a description for the Eicon 1530. This information can be retrieved by SNMP agents.
Range: 0-39 characters.
SET SNMP CONTACT name
Defines the e-mail address of the person responsible for the Eicon 1530. This information can
be retrieved by SNMP agents.
Range: 0-39 characters.
SET SNMP LOCATION name
Describes the physical location of the Eicon 1530. This information can be retrieved by SNMP
agents.
Range: 0-29 characters.
SET SNMP COMMUNITY name
Defines the SNMP community name for the Eicon 1530. The community name acts as a
password controlling SNMP read and write access to all Eicon 1530 configuration settings.
Range: 0-31 characters, no spaces.
SET SNMP TRAPADDR ipaddr
Defines the IP address, in dotted-decimal format, of the remote station where LAN Manager
will send SNMP traps. All standard MIB II traps are supported.