Eicon Networks 1530 - Manual (Page 124)

Command Line Interface 124
DNS DOMAIN Commands
SET DNS DOMAIN domain[,domain[,...]]
When DNS relay is enabled, each DNS request is checked against this parameter. If they match,
a connection defined by this profile is established, and the request is forwarded.
Range: 0-32 characters, or use * to match any name.
SET DNS ADDRESS { PRIMARY | SECONDARY } dnsaddr
Defines the address of the DNS server where DNS requests are to be sent, when DNS Relay is
enabled.
PRIMARY: First DNS server where requests are to be sent.
SECONDARY: Second DNS server (used when the PRIMARY does not reply).
dnsaddr: IP address of the server.
ENABLE DNS RELAY
DISABLE DNS RELAY
When enabled, all DNS requests are forwarded to a remote DNS server. This is done by
matching the requested domain against the domain name assigned to each profile. If a match is
found, the profile is connected and the DNS request is forwarded. Default: Enabled.
SHOW DNS CONFIGURATION
Displays all DNS configuration settings.