Eicon Networks 1530 - Manual (Page 118)

Command Line Interface 118
Direct Commands
SET DIRECT XT1 delay
Defines the RI(on) -> DTR(on) delay.
Range: 0-9999 milliseconds.
Default: 0.
SET DIRECT XT2 delay
Defines the DSR(on) -> RTS(on) delay.
Range: 0-9999 milliseconds.
Default: 0.
SET DIRECT XT9 delay
Defines the DSR debouncing delay.
Range: 0-999 milliseconds.
Default: 100.
SET DIRECT XT10 delay
Defines the maximum delay for establishing a connection.
Range: 15000-65000 milliseconds.
Default: 15000.
SET DIRECT XT12 {NORMAL | IGNORE }
Defines the DSR mode as Normal or Ignore. Default: Normal.
SHOW DIRECT CONFIGURATION
Displays the configuration settings for the direct dialer.