KACO Powador 30.0 - 60.0 TL3 - Manual (Page 16)

Mounting the inverter
Page 16 Operating Instructions for Powador 30.0-72.0 TL3_EN
EN EN
Authorised electrician
NOTE
Power reduction due to heat accumulation.
If the recommended minimum clearances are not observed, the inverter may go into power regula-
tion mode due to insuffi
cient ventilation and the resulting heat build-up.
›
Maintain minimum clearances.
› Provide for suffi cient heat dissipation.
B
A
A
C
A
Figure 6: Minimum clearances
Key
A
horizontal distance between the two inverters / vertical distance
between inverter and the ceiling
50 cm
B Distance in front 100 cm
C Vertical distance to an additional inverter suitable for wall mounting 70 cm
CAUTION
Use suitable mounting parts.
›
Use only the supplied mounting parts.
› Only install inverter in an upright position.
›
For wall mounting: Mount the inverter on a vertical wall only.
›
For upright installation outdoors: Weather-proof base required