KACO Powador 30.0 - 60.0 TL3 - Manual (Page 14)

Preparation
Page 14 Operating Instructions for Powador 30.0-72.0 TL3_EN
EN EN
5.3 Position and secure the device
WARNING
Impact hazard, risk of breakage to the inverter
›
Pack the inverter securely for transport.
›
Carefully transport the inverter using the built-in eyebolts!
CAUTION
Risk of injury if the inverter tips over!
Risk of tipping due to high centre of gravity, particularly with the housing doors open.
›
Anchor the inverter securely to the ground immediately after positioning it and, if possible, fasten
it to the wall.
›
Do not open the housing doors until the inverter has been securely anchored.
30.0-40.0 TL3 F=1.5 kN
60.0-72.0 TL3 F=1,7 kN
1
2
3
Figure 4: Transport device Figure 5: Transportation of the inverter
Key
1 Shackle 3 Centre of gravity
2 Transportation rope
Position device
1. Heave the eyebolts for the hoist.
2. Connect the shackles to the eyebolts.
3. Hang the transportation rope through the shackle.
4. Attach a transportation rope to a stable hoist. (> 2 kN)
5. Raise the device.
6. Transport to the place of assembly (keep an eye on the centre of gravity!)
7. Lash the device securely on the ground.
» Install and secure the inverter.