7 12/24-vdc 64-point output module – Yaskawa 120 Series I/O Modules User Manual
Page 79

3.2 Digital Output Module Specifications
3-49
3
3.2.7
12/24-VDC 64-point Output Module
1) Performance Specifications
Item
Specifications
Name
12/24-VDC 64-point Output Module (Sinking)
Model Name
DC24OUT-64PSN
Model No.
JAMSC-120DDO36410
Rated Voltage
12/24 VDC
Allowable Voltage Range
10.2 to 30.0 VDC
Output Form
Sinking
Maximum Load Current
0.1 A/points
Output Voltage Drop
1.5 V max (0.1 A)
Output Delay Times
OFF to ON: 1 ms max.
ON to OFF: 1 ms max.
OFF Leakage Current
1 mA max. at 24 VDC
Output Type
Transistor outputs
Number of Commons
4
Number of Outputs per Common
16 points/common
External Connections
40-pin connector: 2 pieces
Connector: FCN-365P040 (manufactured by Fujitsu)
Output Protection Type
Unprotected outputs (according to JIS B3502)
Built-in Fuse
Four, 2-A fuses (one per common)
(Burnout time: 1 s max. at 200 % of rated current)
Surge Suppressor
None
Other Output Protection
None
Number of Outputs
64
Output Signal Indication
Indicator for each point; lit when output is ON.
Status saved in internal logic.
32 indicators controlled by toggle switches
Status Indication
ACTIVE: Lights during output processing
F: Lights when fuse is burnt out or output power supply is not
connected
Insulation Method
Photocoupler
Dielectric Strength
1,500 VAC for 1 min or 1,800 VAC for 1 s between output
terminals and internal circuits and between all output com-
mons
Insulation Resistance
100 M
Ω min. at room temperature and humidity between
output terminals and ground (measured with a 500-VDC test
voltage megohmmeter).
External Power Supply
12/24 VDC supplied to drive loads
Derating Conditions
None
Internal Current Consumption
650 mA max. at 5 VDC (with all points ON)
Maximum Heating Value
13 W
Hot Swapping
(Removal/insertion under power)
Permitted
Approximate Mass
300 g
External Dimensions
40.3
×130×103.9 mm (W×H×D)