Yaskawa 120 Series I/O Modules - Manual (Page 62)

3 Digital I/O Specifications
3.2.3 12/24-VDC 8-point Output Module
3-32
3.2.3 12/24-VDC 8-point Output Module
1) Performance Specifications
Item Specifications
Name 12/24-VDC 8-point Output Module
Model Name DC24OUT-8P
Model No. JAMSC-120DDO33000
Rated Voltage 12/24 VDC
Allowable Voltage Range 10.2 to 30.0 VDC
Output Form Sourcing or sinking
Maximum Load Current 2.0 A/point
Output Voltage Drop 0.1 V max (2.0 A)
Output Delay Times OFF to ON: 3 ms max.
ON to OFF: 5 ms max.
OFF Leakage Current 1 mA max. at 24 VDC
Output Type Transistor (FET) outputs
Number of Commons 8 (Each output circuit is independent.)
External Connections Removable terminal block with M3 screw terminals
Output Protection Type Protected outputs (according to JIS B3502)
Built-in Fuse Eight, 3.5-A fuses (one per circuit)
(Burnout time: 1 s max. at 200% of rated current)
Surge Suppressor Zener diode
Other Output Protection None
Number of Outputs 8
Output Signal Indication Indicator for each point; lit when the output is ON.
Status saved in internal logic.
Status Indication ACTIVE: Lights during output processing.
Insulation Method Photocoupler
Dielectric Strength 1,500 VAC for 1 min or 1,800 VAC for 1 s between output
terminals and internal circuits
Insulation Resistance 100 M Ω min. at room temperature and humidity between
output terminals (connected together) and ground
(measured with a 500-VDC test voltage megohmmeter).
External Power Supply 12/24 VDC supplied to drive loads
Derating Conditions None
Internal Current Consumption 220 mA max. at 5 VDC (with all points ON)
Maximum Heating Value 1.6 W
Hot Swapping
(Removal/insertion under power) Permitted
Approximate Mass 250 g
External Dimensions 40.3 ×130×103.9 mm (W×H×D)