Yaskawa 120 Series I/O Modules - Manual (Page 188)

4.4 Operations Using MEMOSOFT
4-41
4
4.4 Operations Using MEMOSOFT
4.4.1 Analog Input Module I/O Allocation Screen - - - - - - - - - - - - - - - - - - 4-41
4.4.2 Analog Output Module I/O Allocation Screen - - - - - - - - - - - - - - - - - 4-42
4.4.3 I/O Allocations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-43
4.4.1 Analog Input Module I/O Allocation Screen
This section gives information on the MEMOSOFT I/O Traffic Cop Screen and the
Parameter Setting Screen.
1) The I/O Traffic Cop (i.e., I/O Allocation) Screen
Fig. 4.1 I/O Traffic Cop Screen
a) Module Type
Enter the Analog Input Module type, for example, 120AVI02000.
b) Set the I/O references to be used by the Analog Input Module.
When the first reference number is input, the cursor will move to the field for the last
reference number and the last reference number will be displayed automatically,
indicating the reference number that can be input. Press Enter Key to accept the
value, or change it to the desired value, if required.
2) The Parameter Setting Screen (Zoom)
Fig. 4.2 Parameter Setting Screen
This section describes the I/O allocations (maps) using the MEMOSOFT.
(a
(b
(b
(a
(c