Yaskawa 120 Series I/O Modules - Manual (Page 48)

3 Digital I/O Specifications
3.1.5 12/24-VDC 64-point Input Module
3-18
Note: (1) The symbol “ -††” in the type stands for length for the cable. See 3.3 I/O Mod-
ule Cables for details.
(2) The terminal block number for the 32-point I/O connector type (manufactured
by OMRON) is not that same as that for the 12/24-VDC 32-point Output Mod-
ule. Refer to 3.3 I/O Module Cables for details.
3.1.5 12/24-VDC 64-point Input Module
1) Performance Specifications
The Module does not conform to JIS B3502 when used as a 12-VDC Module.
Item Specification
At 12 VDC At 24 VDC
Name 12/24-VDC 64-point Input Module
Model Name DC24IN-64P
Model No. JAMSC-120DDI36400
Rated Voltage 12/24 VDC
Maximum Allowable
Voltage 30 VDC
Input Form Sourcing or sinking
Rated Current 2 mA 4 mA
Input Impedance 5.6 k Ω
Standard Operating
Ranges Minimum ON voltage: 9 VDC
Maximum OFF voltage: 5 VDC
Input Type Does not conform to JIS B3502. DC type 2 (according to JIS B3502)
Input Delay Times OFF to ON: 5 ms max.
ON to OFF: 5 ms max.
Number of Commons 4
Number of Inputs per
Common 16 points/common
External Connections 40-pin connector: 2 pieces
Connector type: FCN-365P040 (made by Fujitsu)
Number of Inputs 64
Input Signal Indica-
tion Indicator for each point; lit when the input is ON.
Status saved in internal logic.
32 indicators controlled by toggle switches
Status Indication ACTIVE: Lights during input processing
Insulation Method Photocoupler
Dielectric Strength 1,500 VAC for 1 min or 1,800 VAC for 1 s between input terminals and
internal circuits and between all input commons
Insulation Resistance 100 M Ω min. at room temperature and humidity between input terminals
and ground (measured with a 500-VDC test voltage megohmmeter).
External Power Sup-
ply 12 VDC supplied to signals 24 VDC supplied to signals
Derating Conditions None
Internal Current Con-
sumption 100 mA max. at 5 VDC (with all points ON)
Maximum Heating
Value 7.0 W