Yaskawa 120 Series I/O Modules - Manual (Page 176)

4.2 Analog Output Specifications
4-29
4
5) I/O Allocation
I/O allocation is necessary when using the Analog Output Module ( ±10 V, 4 chan-
nels) or Analog Output Module (0 to 5 V, 2 channels). For further details on I/O allo-
cation, refer to 4.3 I/O Allocation.
6) External Appearance
The appearance and configuration of the Analog Output Module (0 to 10 V, 2 chan-
nels) are shown below. The appearance and configuration of the Analog Output
Module (0 to 5 V, 2CH) are the same as the following illustration except for the
model description.
LED Color State Indication when ON
RDY Green Lit Module is normal.
Flashing Initial check error has occurred.
Not lit WDT timeout error has occurred.
ACT Green Lit Module is processing I/O.
Not lit CPU Module is in the STOP state or I/O pro-
cessing error has occurred.
ERR Red Flashing Parameter checksum error has occurred.
Not lit Module is normal.
Removable terminal block
for field connections
Hinged terminal cover Signal label insert Color code
(dark green)
LED area
Module mounting screw
(Use a M4 Phillips screwdriver.)
Module description
(120AVO01100)
Field wiring terminal
(Use a M3 Phillips screwdriver.)
Terminal block mounting screw
(Use a M3 Phillips screwdriver.)
LED Area
120 AVO 011 00
ACT ERR RDY