Yaskawa 120 Series I/O Modules - Manual (Page 143)

3.5 Operations Using MEMOSOFT
3-113
3
(3) The reference number of the last output coil will be displayed.
(4) This completes the setting of I/O references.
I/O references for the Digital Input Module can be set in the same way as the Digital
Output Module.
4) Setting the Data Type
Press the F4 (Zoom) Key to access to the Parameter Setting Screen (I/O Map Mod-
ule Editor).
(1) Move the cursor to OUTPUT DATA TYPE and press the Enter Key to access
the mode setting.
(2) A screen will appear so that the data type setting can be selected.
Move the cursor to either BIN or BCD and press the Enter Key to select the
desired mode.
The MEMOSOFT is set by default to BIN.
Fig. 3.26 Reference Number of Last Output Coil
INFO
Fig. 3.27 Parameter Setting Screen: Data Type