Yaskawa 120 Series I/O Modules - Manual (Page 101)

3.3 I/O Module Cables
3-71
3
6) Connecting to 32-point I/O Connector Terminal Block
For the combination of W0301 Cable and 32-point I/O connector Terminal Block
3.3.5 32-point I/O Connector Terminal Block
1) Use
(1) This terminal block is used to connect external devices to the Modules listed
below.
(a) 12/24-VDC 32-point Input Module (Model No. JAMSC-120DDI35400)
(b) 12/24-VDC 32-point Output Module (Model No. JAMSC-120DDO35410)
(2) Use this terminal block in combination with a W0301 Cable.
(3) Use the 32-point I/O Connector Terminal Block manufactured by OMRON Cor-
poration (Model No. XW2B-40F5-P).
2) Approximate Specifications
The following table shows approximate specifications of an OMRON-manufactured
XW2B-40F5-P Terminal Block.
Connector 1 (Module side)
Connector 2 (external device side)
Shielded cable
32-point I/O connector
Terminal Block
Connecting to connector 2 of W0301 Cable
W0301 Cable
Table 3.6 Specifications of 32-point I/O Connector Terminal Block XW2B-40F5-P
Item Specifications
Model No. XW2B-40F5-P
Connector FCN-364P040-AU (Fujitsu Ltd.)
External Connections Terminal block with M3.5 screw terminals
Structure Wall mounting
Approximate Mass 200 g
External Dimensions 216.5 ×45×43 mm (W×H×D)