Yaskawa 120 Series I/O Modules - Manual (Page 190)

4.4 Operations Using MEMOSOFT
4-43
4
2) The Parameter Setting Screen (Zoom)
Fig. 4.4 Parameter Setting Screen
a) Mode Set
Select the data format output from the Analog Output Module.
For some Analog Output Modules, no selection of data format is required.
b) Service Scan (Normal/High-speed)
Set either Normal or High-speed scan for I/O data refresh cycle.
c) Timeout Output (Open/Hold/Set by user)
The data that is output when the CPU Module changes from a running status to a
stopped status can be specified:
OPOEN OUTPUT
HOLD OUTPUT
SET BY USER
d) Timeout Output Data
If “Timeout Output Data” is specified for c) Output Status When CPU Stops, set the
data output when the CPU Module stops.
4.4.3 I/O Allocations
This section explains the operation method of I/O Allocation taking the example of
Analog Input Modules. The operation method for Analog Output Modules is the
same as for Analog Input Modules.
1) I/O Allocation Items
I/Os must be allocated to use the Analog Input and Output Modules. I/O allocations
are made using the MEMOSOFT and the results are recorded in the I/O allocation
tables stored in memory of the CPU Module.
The following items must be set for I/O allocations.
• Module Type
• I/O References
• Mode
• Service Scan (Normal/High-speed scan)
(b
(a
(c
(d