Yaskawa 120 Series I/O Modules User Manual
Page 248
6.2 Panel Wiring
6-21
6
c) If I/O signal cables are assembled by the user, use the following electric cables and
connectors:
• Cable size: 0.08 mm
2
(AWG28)
• Module side connector: 10140-6000EL+10340-55S0-008-F (3M)
d) When an W0300 32-point I/O Module Cable is used, select the appropriate cable
from the three cables shown in the following table:
As shown in the following figure, the external device side of the W0300 cable is
divided into individual wires. The cable size is 0.08mm
2
.
e) When a W0302 32-point I/O Module cable is used, select the appropriate cable from
the three cables shown in the following table:
Table 6.8 W0300 32-point I/O Module Cables
Item
Specifications
Name
W0300 Cable
Model Name
W0300-01
W0300-03
W0300-05
Model No.
JZMSZ-120W0300-01
JZMSZ-120W0300-03
JZMSZ-120W0300-05
Length (L)
1.0 m
3.0 m
5.0 m
Cable Specifications
Shielded cable of 40 conductors, corresponding to UL20276, AWG28
(0.08mm
2
)
Terminals
Module Side
Connector: 10140-6000EL+10340-55S0-008-F (3M)
External
Device Side
Loose wires; Cable length: 150mm, pin number labeled on each wire
Connector (Module side)
Loose wires
(external device side)
Pin number is attached to each wire.
Shielded cable
Model name
40-core
loose wires
150 mm
Table 6.9 W0302 32-point I/O Module Cables
Item
Specifications
Name
W0302 Cable
Model Name
W0302-01
W0302-03
W0302-05
Model No.
JZMSZ-120W0302-01
JZMSZ-120W0302-03
JZMSZ-120W0302-05
Length (L)
1.0 m
3.0 m
5.0 m
Cable Specifications
Shielded cable of 40 conductors, corresponding to UL20276, AWG28
(0.2mm
2
)
Terminals
Module Side
Connector: 10140-6000EL+10640-5500-008 (3M)
External
Device Side
Loose wires; Cable length: 150mm, pin number labeled on each wire