Yaskawa 120 Series I/O Modules - Manual (Page 215)

5.4 Operations Using MEMOSOFT
5-17
5
5.4 Operations Using MEMOSOFT
5.4.1 Register Input Module I/O Allocation Screen - - - - - - - - - - - - - - - - - 5-17
5.4.2 Register Output Module I/O Allocation Screen - - - - - - - - - - - - - - - - 5-18
5.4.3 I/O Allocations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-20
5.4.1 Register Input Module I/O Allocation Screen
This section describes the MEMOSOFT I/O Allocation Screen and the Parameter
Setting Screen.
1) The I/O Traffic Cop (i. e., I/O Allocation) Screen
In this screen, set the following items.
Fig. 5.3 I/O Traffic Cop Screen
a) Module Type
Enter 120RDI34410 for the Register Input Module.
b) Set the I/O references to be used by the Register Input Module.
When the first reference number is input, the cursor will move to the field for the last
reference number and the last reference number will be displayed automatically,
indicating the reference number that can be input. Press Enter Key to accept the
value, or change it to the desired value, if required.
2) The Parameter Setting Screen (Zoom)
In this screen, set the following items.
Fig. 5.4 Parameter Setting Screen
This section describes the I/O allocations using the MEMOSOFT.
a)
b)
a)
b)
c)
d)