SMA SSM16-11 - Manual (Page 53)

SMA Solar Technology AG 10 Configuring the Sunny String-Monitor with Sunny Data Control
Installation Guide SSM16-24-IA-IEN105120 53
10 Configuring the Sunny String-Monitor with Sunny
Data Control
10.1 Organizing the Configuration
For the Sunny Central 100/200/250/350 inverters and the Sunny Central of the HE‑11 series, you
can configure the Sunny String-Monitor with the Sunny Data Control program.
Sunny Data Control is a PC program by SMA Solar Technology AG with which you can store your
PV plant data in the long term and visualize it. Sunny Data Control can be downloaded free from
www.SMA.de/en (For information on how to use Sunny Data Control, see the Sunny Data Control
user manual at www.SMA.de/en).
If you re-install Sunny Data Control on your PC, default values are set for this new version. To allow
communication with Sunny Central Control, these values must be modified as follows:
Sunny Data Control Version
• Use Sunny Data Control up to version 3.9.3 to configure the Sunny String-Monitor.
Password Protection
In order to change parameters, entering the installer password is required. Contact the
SMA Serviceline about this (please see the user manual for Sunny Data Control at
www.SMA.de/en for information about password protection).
Property Default value Value for Sunny Central Control
Channel request 10 s 200 s
Storage time request 10 s 200 s
Detection Find First 5 s 10 s
Detection Find Next 7 s 10 s