SMA SSM16-11 - Manual (Page 28)

5 Assembly SMA Solar Technology AG
28 SSM16-24-IA-IEN105120 Installation Guide
Figure 9: SSM 24-11 dimensions
1. Mark the position of the holes.
2. Drill the holes in the indicated positions.
3. Insert the screw anchors.
4. Attach the mounting rails to the
Sunny String‑Monitor with the screws supplied
(torque: 15 Nm).
5. Fasten the Sunny String-Monitor to the wall or stand using suitable screws. The connection area
must point downwards.
6. Make sure that the device is securely in place.