SMA SSM16-11 - Manual (Page 12)

2 Safety SMA Solar Technology AG
12 SSM16-24-IA-IEN105120 Installation Guide
Damage to the Sunny String-Monitor
If the Sunny String-Monitor or the PV plant are handled by persons unauthorized to do so, they might
sustain damage.
• Lock the Sunny String-Monitor after it has been put into operation.
• Remove the keys from the door locks.
• Keep the keys in a safe place.
Environmental Influences
When closed, the Sunny String-Monitor carries IP54 and is thus protected from dust and water.
• Do not carry out any assembly work in rain, fog or if humidity exceeds 95%.
• Close the doors of the Sunny String-Monitor after work on it is complete.
Electrostatic Discharge
Electrostatic discharge can destroy electronic component parts.
• When you work on the Sunny String-Monitor or its assemblies, observe the ESD safety
regulations and wear protective gloves.
• Conduct any electrostatic charges away from the electronic component parts before touching
them. To do this, touch the unpainted grounded parts of the housing, the PE connection, for
example.