SMA SSM16-11 - Manual (Page 52)

9 Configuring the Sunny String-Monitor via Sunny Central Control SMA Solar Technology AG
52 SSM16-24-IA-IEN105120 Installation Guide
9.3.7 Setting the Theft Protection
Theft protection is deactivated by default in Sunny Central Control.
1. Select Device Set-up > SMUs > Parameters.
2. In the SMU Theft. submenu, set the theft protection.
9.4 Reading the Measured Values
9.4.1 Reading the Mean Values of the Groups
The mean values of the measuring channels for each group are displayed and updated at 5 minute
intervals.
• Select Device Set-up > SMUs > Measured Values and read the values.
9.4.2 Reading the Mean Values for the Individual Measuring
Channels
The mean values for the individual measuring channels are updated and displayed at 5-minute
intervals.
• Select Device Set-up > SMUs > Devices > Measured Values and read the values.
9.5 Reading and Confirming Messages
9.5.1 Resetting the Messages
The individual meanings of the warnings and failures in the Sunny Central Control can be found in the
Sunny Central user manual.
Sunny Central Control resets messages which appear during a day automatically at midnight. These
messages can be read the next day in the event history. The individual error sums of the measuring
channels are reset at 00:00 o'clock.
9.5.2 Reading and Confirming Current Messages
1. Select Device Set-up > SMUs > Failure > actual Failures.
2. To confirm the message, select the submenu SMU Error quit. By doing this, you reset the error
sum.
9.5.3 Reading and Confirming the Event History
1. Select Device Set-up > SMUs > Failure > Hist. Failures.
2. To confirm the message, select the submenu SMU Error quit. By doing this, you reset the error
sum.