beautypg.com

6 automatic program start, Application, Automatic program start – HEIDENHAIN TNC 320 (77185x-01) User Manual

Page 494

background image

Test run and program run

15.6 Automatic program start

15

494

TNC 320 | User's Manual

HEIDENHAIN Conversational Programming | 3/2014

15.6

Automatic program start

Application

The TNC must be specially prepared by the machine

tool builder for use of the automatic program start

function. Refer to your machine manual.

Caution: Danger for the operator!

The autostart function must not be used on

machines that do not have an enclosed working

space.

In a Program Run operating mode, you can use the

AUTOSTART

soft key (see figure at upper right) to define a specific time at which

the program that is currently active in this operating mode is to be

started:

Show the window for entering the starting time

(see figure at center right)
Time (hrs:min:sec): Time of day at which the

program is to be started
Date (DD.MM.YYYY): Date on which the program

is to be started
To activate the start, press the

OK