HEIDENHAIN TNC 320 (77185x-01) User Manual
Page 382
Programming: Multiple Axis Machining
12.2 The PLANE Function: Tilting the Working Plane (Software Option 1)
12
382
TNC 320 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014
Function
Required parameters
Soft key
Page
POINTS
Coordinates of any three
points in the plane to be
tilted
RELATIV
Single, incrementally
effective spatial angle
AXIAL
Up to three absolute or
incremental axis angles
A,B,C
RESET
Reset the PLANE
function
The parameter definition of the
PLANE function is
separated into two parts:
The geometric definition of the plane, which
is different for each of the available
PLANE
functions.
The positioning behavior of the
PLANE function,
which is independent of the plane definition and is
identical for all
PLANE functions, see "Specifying
the positioning behavior of the PLANE function",
The actual-position-capture function is not possible
with an active tilted working plane.
If you use the
PLANE function when M120 is
active, the TNC automatically rescinds the radius
compensation, which also rescinds the
M120
function.
Always use
PLANE RESET to reset PLANE functions.
Entering 0 in all
PLANE parameters does not
completely reset the function.
If you restrict the number of tilting axes with the
M138 function, your machine may provide only
limited tilting possibilities.
You can only use the PLANE functions with tool axis
Z.
The TNC only supports tilting the working plane with
spindle axis Z.