HEIDENHAIN TNC 320 (77185x-01) - Manual (Page 473)

Graphics 15.1
15
TNC 320 | User's Manual
HEIDENHAIN Conversational Programming | 3/2014
473
Plan view
Select plan view:
Press the plan-view soft key
Projection in three planes
The simulation shows three sectional planes and a 3-D model,
Similar to a technical drawing.
Select projection in three planes:
Press the view-in-three-planes soft key
Move the sectional planes:
Select the functions for shifting the sectional
plane. The TNC offers the following soft keys:
Function Soft keys
Shift the vertical sectional plane to the
right or left
Shift the vertical sectional plane forward
or backward
Shift the horizontal sectional plane
upwards or downwards
The position of the sectional planes is visible during shifting.
The default setting of the sectional plane is selected so that it lies
in the working plane in the workpiece center and in the tool axis on
the top surface.
Return sectional planes to default setting:
Select the function for resetting the sectional
planes.