Polaris 2016 INDIAN Chief Classic - Manual (Page 90)

88
Maintenance
Safety During Service Procedures
Failure to follow all recommended precautions and procedures could result in severe injury or death. Always heed all safety precautions and
follow all operation, inspection and maintenance procedures outlined in this manual.
• Improperly installed or adjusted components can make the
motorcycle unstable or hard to handle. Improperly installed
electrical components can cause engine or electrical system
failure. In either event, damage or serious injury could result. If
you do not have the time, tools and expertise necessary to
complete a procedure properly, please see your dealer for
service.
• Review the safety-related maintenance information on page 17.
• Before beginning any maintenance procedure, read the
instructions for the entire procedure.
• Always position the motorcycle on a firm level surface before
performing service. Make sure the motorcycle will not tip or fall
while elevated or while on the sidestand. See page 128.
• Hot engine and exhaust components can cause burns to skin and
can ignite a fire if exposed to flammable materials. Always park
the motorcycle clear of flammable materials and where people are
not likely to contact hot components.
• Wear eye and face protection when using pressurized air.
• Never start the engine or let it run in an enclosed area. Engine
exhaust fumes are poisonous and can cause loss of consciousness
or death in a short time.
• During some procedures you may use potentially hazardous
products such as oil or brake fluid. Always follow the instructions
and warnings on the product packaging.
WARNING