beautypg.com

Maintenance, Electrical precautions, Unlocking the security system – Polaris 2016 INDIAN Chief Classic User Manual

Page 128

background image

126

Maintenance

Electrical Precautions

Be aware of the following precautions regarding the

electrical system to avoid disruption of electrical signals

and possible system malfunction.
• DO use ONLY genuine INDIAN MOTORCYCLE parts and

accessories designed for your model, and follow the

instructions provided.

• DO use the accessory power jack provided (if equipped).
• If it is necessary to provide power to an item that does not

use one of the previously mentioned power jacks, connect

to the load side of the main circuit breaker and connect

the ground wire to the engine ground at the front left side

of the crankcase (near the circuit breaker). On DARK

HORSE models the circuit breaker is located under the

cover next to the oil filter adapter. On all other models it’s

located under the cover behind the oil cooler.

• DO NOT splice or cut any wires.
• DO NOT tap in to any power or ground on the motorcycle

unless specifically directed to do so by the INDIAN

MOTORCYCLE instructions that come with the kit.

• DO NOT back-probe electrical connectors on the vehicle

unless directed to do so by the INDIAN MOTORCYCLE

Service Manual.

• DO NOT power any accessories from the diagnostic

connector (under left side cover).

Unlocking the Security System

Your dealer will provide the master personal identification

number (PIN) for the security system. Your dealer may also

change the master PIN to a new rider PIN on your behalf.
Record both PINs on page 5.
Change the dealer-provided PIN to a PIN of your own

choosing as soon as possible after receiving delivery of your

new motorcycle. See page 127.
If a key fob is not available, your rider PIN can be entered

using the turn signal switches to unlock the security system.

Use the following guide to enter your valid rider PIN.

Digit to Enter

Turn Signal

Feature Used

Procedure

The number “0”

CANCEL switch

Press and release

First digit (1-9)

LEFT turn switch

Move and release

once per digit

value. See example

below.

Second digit (1-9)

RIGHT turn switch

Third digit (1-9)

LEFT turn switch

Fourth digit (1-9)

RIGHT turn switch

Example for entering the number 1024:

LEFT - CANCEL - LEFT - LEFT - RIGHT - RIGHT - RIGHT - RIGHT