Polaris 2016 INDIAN Chief Classic - Manual (Page 138)

136
Cleaning and Storage
Leather Care
Leather Facts
Leather is a natural product and will exhibit qualities
inherent in a natural material. Fading, wrinkles, grain
changes, creases and small marks are assurance that this
material is not man-made. As the product is used, each
leather product will exhibit tarnish from use. Regular care
will help keep premium leather products looking their best.
Exposure to Sun
There are many environmental elements that will contribute
to the aging of leather products. Regular exposure to the
sun, along with heat from the sun and exhaust system or
engine components, may rapidly fade the leather. Heat from
the sun will dry the leather, potentially causing it to crack.
Periodic application of INDIAN MOTORCYCLE Leather Care
Dressing will replace the oils, maintaining the leather’s
natural surface. Periodic use of the Tan Leather Restore Kit
will help restore and maintain the oil-tanned color and finish
to help keep it looking its best.
Exposure to Moisture
If leather is exposed to moisture, wipe down the leather
products and allow them to dry naturally at room
temperature. Do not attempt to accelerate the drying
process by using heat. Heating the leather will remove the
natural oils and cause it to dry out and crack. Whenever
possible, take steps to protect the leather from exposure to
moisture.
NOTICE: The leather used on INDIAN motorcycles is an all-natural
product; exposure to moisture will result in structural
changes to the material, causing permanent damage.
Regular usage of INDIAN MOTORCYCLE Leather Care
Dressing will help prevent this type of damage.
Exposure to Dirt/Dust
Leather items on motorcycles can get extremely dirty with
normal use. It is acceptable to wipe down leather products
with a sponge and clean water, especially after a long ride.
If extremely dirty, use a small amount of mild soap in the
water and follow with a clean water rinse.