Polaris 2016 INDIAN Chief Classic - Manual (Page 46)

44
Instruments, Features and Controls
Instrument Cluster (CHIEFTAIN/ROADMASTER)
Infotainment Display Settings
Fuel Economy
This screen will display the current
instant and average miles per gallon
(MPG) or liters per 100 kilometers.
1. Press and hold
LEFT-TOGGLE to
reset the average.
2. Press LEFT-TOGGLE to cycle to
the Front/Rear Tire Pressure
display.
Front/Rear Tire Pressure
This screen will display the current
front and rear tire pressure in PSI or
kPa.
• Press
LEFT-TOGGLE to cycle to the
Engine Hours/Oil Life display.
Engine Hours/Oil Life
This screen will display the total
engine hours accumulated when the
engine is running.
Engine oil life is also displayed. The
rate at which oil life is reduced to 0% is
determined by the following:
• Engine break-in period: 0-500 miles or
804 km
• Routine oil change intervals: Every 5,000
miles or 8,046 km
Tip: When engine oil life reaches 0%,
change the engine oil and filter.
After changing the engine oil and
filter:
1. Press and hold
LEFT-TOGGLE until the value begins to
flash.
2. Press and hold LEFT-TOGGLE to reset the engine oil life
to 100%.
3. Press LEFT-TOGGLE to display Average Speed/Battery
Voltage screen.