Polaris 2016 INDIAN Chief Classic - Manual (Page 191)

189
Audio System
Audio Mode Menus
Bluetooth Setup Menu
Unpairing/Reconnecting Devices
Tip: The following steps reference the DRIVE H-SET as an example.
Unpairing other devices follows the same procedures.
1. In the Bluetooth Setup Menu, use
or to make a selection.
Select DRIVE H-SET.
2. Press and release .
3. To unpair ALL of the devices in
the DRIVE H-SET location, press
or to select UNPAIR ALL,
and then press .
4. Press or to select NO or
YES. Select YES, and then press
and release to unpair all
devices.
The radio will unpair all of the devices from this location
and return to the Bluetooth Setup Menu.
5. To unpair individual devices in
the DRIVE H-SET location, press
and release
or to select
the device you want to unpair.
6. Press and release to select
the device.
7. Press and release or to
select UNPAIR.
8. Push and release to unpair
the device.
“UNPAIRED” will be displayed
after the device is removed from
the list.
The radio will return to the
DRIVE H-SET device location.
9. To connect a different paired
device at a location, select that
device and press to select
it. Select RECONNECT. Press
.