Polaris 2016 INDIAN Chief Classic - Manual (Page 137)

135
Cleaning and Storage
Gloss Clear Coat Finish Care
The Axalta Sports and Equipment Finish System was used to
provide the original gloss finish on your motorcycle. This
finish system provides superior protection against the
elements. To maximize the benefits of this system, use the
following guide to care for the gloss finish on your
motorcycle.
• During the first 30 days, when the finish is still fresh, clean
the motorcycle with a water rinse only.
• Do not wax the motorcycle for the first 60 days. Doing so
can cause loss of the gloss. After 60 days, use only waxes
designed for new clear coat finishes.
• Do not use pressurized water to wash the motorcycle.
When paint is still fresh, pressurized water could damage
the finish. If using a pressure washer is unavoidable, keep
the spray nozzle at least 24 inches (60 cm) away from the
surface of the motorcycle.
• Wash your motorcycle often, especially when exposed to
salty, dusty, acidic or alkaline environments.
• Use warm or cool water and a soft cloth for cleaning.
• Use soaps that are non-abrasive and have a neutral pH
(non acidic/non alkaline detergents).
• Do not use solvent-based solutions.
• Do not use a dry cloth to remove dust.
• Do not use a stiff bristle brush, which can scratch the
surface.
• Do not wash with extremely hot water.
• Do not wash the motorcycle while the surface is hot and
avoid washing the motorcycle in the hot sun. Minerals in
the water may be difficult to remove once dried on the
surface of the motorcycle.
• Do not allow spilled gasoline, motor oil or brake fluid to
stand on the paint. Remove these substances immediately
by rinsing with water. Use a soft cloth to absorb any
remaining residue and dab dry.
• To remove bug remnants or road tar, use only products
that are specifically designed for this purpose. Follow the
product manufacturer’s recommendations to prevent
potential damage to the finish. Follow with a wash using
the methods described in this section.
• Always brush away any ice or snow, do not scrape off.
• Chips or scratches should be repaired promptly to
prevent corrosion.