Polaris 2016 INDIAN Chief Classic - Manual (Page 42)

40
Instruments, Features and Controls
Instrument Cluster (CHIEFTAIN/ROADMASTER)
Indicator Lamps
Lamp Indicates Condition
Neutral The transmission is in neutral and the power switch is ON.
Vehicle
Speed
When standard mode is selected, speed displays in miles per hour.
When metric mode is selected, speed displays in kilometers per hour.
High Beam The headlight switch is set to high beam. This indicator will flash if there is a problem with the low or high beam
light.
Low Oil
Pressure
This lamp illuminates when oil pressure drops below a safe operating pressure while the engine is running. If
this lamp illuminates while the engine is running above idle speed, turn the engine off as soon as safely
possible and check the oil level. If the oil level is correct and the lamp remains on after the engine is restarted,
turn the engine off immediately. See your dealer.
Low Fuel This lamp illuminates when approximately one gallon (3.8 liters) of fuel remains in the fuel tank. The LCD
Display will switch into a Low Fuel Mileage Counter Mode to provide the rider with mileage tracking from the
time the indicator was activated.
Turn Signal One arrow flashes when the corresponding turn signal is activated. Both arrows flash when the hazard signal is
activated. If there is a problem in the signal system, the lamps will flash at twice the normal rate.