Polaris 2016 INDIAN Chief Classic - Manual (Page 74)

72
Pre-Ride Inspections
Rear Brake Fluid Level
The rear brake fluid reservoir is located near the rear brake
pedal. View the reservoir level from the right side of the
vehicle.
1. Position the motorcycle on level ground in the fully
upright position.
2. View the brake fluid through the reservoir.
3. The fluid should be clear. Replace cloudy or
contaminated fluid.
4. The fluid level should be above the minimum indicator
mark on the reservoir body. Add brake fluid as needed.
See page 108.
Brake Lines
Inspect all brake hoses and connections for dampness or
stains from leaking or dried fluid. Tighten any leaking
connections to the proper torque values and replace
components as necessary. See the INDIAN MOTORCYCLE
Service Manual or an authorized INDIAN MOTORCYCLE
dealer.
WARNING! Brake fluid leaks or low brake fluid levels could cause
brake system failure, which could result in serious injury or death. Do
not operate the vehicle with low brake fluid levels or when leaks are
evident (dampness or stains from dried fluid). See your authorized
INDIAN MOTORCYCLE dealer.
Minimum
Level Mark
Sight
Glass