Polaris 2016 INDIAN Chief Classic - Manual (Page 39)

37
Instruments, Features and Controls
Instrument Cluster (CHIEF/DARK HORSE)
Multi-Function Display (MFD)
Diagnostic Functionality
Certain conditions will cause an error message to display in the screen. If this occurs, please see your authorized dealer.
Engine Error Codes
The error screen displays only when the CHECK ENGINE light is on or when it
goes on and off during one ignition cycle. Error codes display only during the
current ignition cycle. When the power switch is turned OFF, the code and
message is lost, but will reappear if the fault reoccurs after restarting the
engine.
If the CHECK ENGINE indicator lamp illuminates, retrieve the error codes
from the display.
1. If the error codes are not displayed, use the LEFT-TOGGLE switch to
toggle until “Ck ENG” displays on the main line of the display.
2. Press and hold the LEFT-TOGGLE switch to enter the diagnostics code
menu.
3. Record the three numbers displayed in the gear position, clock and
odometer displays.
4. See an authorized dealer for code details and diagnosis.
Message Location Indicates
ERROR All Checksum error (gauge malfunction)
LO (CHIEF) DC Voltage Screen Voltage remains below 11.0 volts for more than 10 seconds
OV (CHIEF) DC Voltage Screen Voltage remains above 15.0 volts for more than 10 seconds
Suspect Parameter
Number (SPN)
Error Code
Number (0-9)
Failure Mode Indicator (FMI)