Polaris 2016 INDIAN Chief Classic - Manual (Page 183)

181
Audio System
Voice Recognition Mode
The radio features voice recognition when a driver headset
is connected and turned on. Radio Bluetooth functionality is
dependent on the capabilities of the device. Please see your
device’s user manual.
Tip: Make sure the Bluetooth volume on your device is turned all the
way up.
The device's signal and battery strength are shown on the
display with a range of zero to five (0-5), with “5”
representing maximum strength.
Initiating a Phone Call
To initiate a phone call, double-
press
to request voice
recognition mode.
Speak phone commands into
microphone. Press and release
or press and release
while in voice recognition mode to
re-send or resume voice
recognition request.
When the phone call is initiated,
“DIALING” and either the caller ID
or “OUTGOING CALL” will be
displayed.
Press
to cancel outgoing call
if desired.
When the call is answered, the
screen will display “CONNECTED”.
Press and release
to end the
phone call.
Receiving/Answering
Phone Calls
When a phone is paired to DRIVER
DEVICE, the audio system will allow
the driver to either answer or reject
an incoming phone call.
When an incoming phone call is
received, the screen will display the
information of the caller.
Press
to answer the call.
Press to reject the call.
To end the phone call, press .
Full screen
mode shown
Full screen
mode shown
Full screen
mode shown