Polaris 2016 INDIAN Chief Classic - Manual (Page 76)

74
Pre-Ride Inspections
Fasteners
1. Inspect the entire motorcycle chassis and engine for
loose, damaged or missing fasteners.
2. Tighten loose fasteners to the proper torque. See the
INDIAN MOTORCYCLE Service Manual or an authorized
INDIAN MOTORCYCLE dealer.
Tip: Always replace stripped, damaged or broken fasteners
before riding. Use genuine INDIAN MOTORCYCLE
fasteners of equal size and strength.
Front Suspension
Inspect the front forks for oil leaks or damage, and verify
smooth suspension operation. See page 102.
Steering
1. On level ground, straddle the motorcycle and bring it to
the fully upright position. Turn the handlebars from stop
to stop. The action should be smooth, but not loose.
2. Make sure wires, hoses and control cables do not
interfere with smooth steering.
Rear Suspension
Check the rear shock absorber mounting and inspect for
leaks. See your dealer for service if you discover leaks or
malfunction of any kind. See page 98.
CHIEFTAIN/ROADMASTER only: Check rear shock absorber
movement and air pressure to ensure the correct amount of
suspension travel and ground clearance. See page 100.
WARNING! Inadequate ground clearance could result in
components contacting the ground, causing loss of control and
serious injury or death. Always ensure ground clearance is at
specification.