beautypg.com

Maintenance, Changing your security system pin – Polaris 2016 INDIAN Chief Classic User Manual

Page 129

background image

127

Maintenance

Changing Your Security System PIN

To change your PIN, you must have either the key fob or your

existing valid PIN available to gain access to the security

system. If the key fob is not detected or is not available and

you cannot remember your PIN, please see your INDIAN

MOTORCYCLE dealer.
Please read the entire procedure before beginning.
1. Turn the power switch on. Do NOT start the engine. The

security light and/or power switch will turn on briefly

until the key fob is detected or until the valid, current

PIN is entered.

2. Push or hold the turn signal CANCEL switch for 10

seconds until the security light and/or power switch turn

on.

3. Enter either the master PIN or your current 4-digit rider

PIN within 20 seconds. If the PIN is successfully entered,

the security light and/or power switch will remain on

and the horn will sound briefly.

Tip: If the valid PIN is not entered within 20 seconds, the security

light and/or power switch will flash for 10 seconds, then the

system will shut down. Return to step 1 to try again.

Entering Your New Rider PIN
4. Enter a new 4-digit security PIN of your own choosing. If

the PIN is successfully entered, the security light and/or

power switch will remain on and the horn will sound

briefly. Proceed to step 5.

Tip: If the 4-digit PIN is NOT successfully entered within 20 seconds,

the security light and/or power switch will flash for 10 seconds,

then the system exits the procedure. Return to step 1 to try

again.

5. Re-enter the new 4-digit PIN. If this entry matches the

first entry, the security light and/or power switch will

turn off and the horn will sound briefly. The new rider

PIN has been saved. Record your new rider PIN on page

5.

Tip: If the second entry is not entered within 20 seconds or does not

match the first entry, the security light and/or power switch will

flash for 10 seconds, then the system exits the procedure. The

new PIN was NOT saved. Continue to use your former valid PIN.

Return to step 1 to try again.