Polaris 2016 INDIAN Chief Classic - Manual (Page 38)

36
Instruments, Features and Controls
Instrument Cluster (CHIEF/DARK HORSE)
Multi-Function Display (MFD)
Display Units (Standard/Metric)
The display can be changed to display either standard or
metric units of measurement.
1. Stop the engine.
2. Wait 10 seconds.
3. Press and hold the LEFT-TOGGLE switch while pressing
the power switch.
4. When the display flashes the distance setting, tap the
LEFT-TOGGLE switch to advance to the desired setting.
5. Press and hold the LEFT-TOGGLE switch to save the
setting and advance to the next display option.
6. Repeat the procedure to change remaining display
settings.
Clock
Tip: The clock must be reset any time the battery has been
disconnected or discharged.
1. Use the LEFT-TOGGLE switch to toggle to the odometer
display.
2. Press and hold the LEFT-TOGGLE switch until the hour
segment flashes. Release the switch.
3. With the segment flashing, tap the LEFT-TOGGLE switch
to advance to the desired setting.
4. Press and hold the LEFT-TOGGLE switch until the next
segment flashes. Release the switch.
5. Repeat steps 3-4 twice to set the 10-minute and 1-minute
segments. After completing the 1-minute segment, step
4 will save the new settings and exit the clock mode.
Standard
Display
Metric Display
Distance Miles Kilometers
Fuel U.S. Gallons I = Imperial
Gallons
Liter = Liters
Temperature Fahrenheit Celsius
Time 12-Hour Clock 24-Hour Clock