Polaris 2016 INDIAN Chief Classic - Manual (Page 30)

28
Instruments, Features and Controls
Switches
Engine Starter Switch
Read the engine starting
procedures before starting the
engine. See page 79.
The power switch does not have
to be on to start the engine.
Press and hold the starter switch
to engage the one-touch starting
feature, which activates the
electrical system and starts the
engine. The engine stop/run
switch must be in the RUN
position and the transmission
must be in neutral.
Keyless Ignition
When the electrical system is activated with either the
power switch or the starter switch, the key fob must be
within range. If the key fob is not detected, the security light
and/or power switch will flash. The electrical system will
automatically shut down.
The starter motor will not engage during this time. If a key
fob is not available, your personal identification number
(PIN) can be entered using the turn signal switches to
unlock the security system. See page 126.
Audio System Switches (if equipped)
See page 165 for audio systems operation.
Cruise Control Switches
Refer to the Cruise Control section of this manual
(beginning on page 85) for cruise control operation.
Starter Switch
Right Control