Instruments, features and controls, Gear shift lever – Polaris 2016 INDIAN Chief Classic User Manual
Page 57
55
Instruments, Features and Controls
Gear Shift Lever
The gear shift lever is located on the left side of the
motorcycle. Operate the lever with your foot.
• Press downward on the toe lever to shift to a lower gear.
• Lift upward on the toe lever to shift to a higher gear.
• Release the lever after each gear shift.
• See pages 81-83 for gear shifting procedures.
Tire Pressure Monitoring System
(TPMS) (if equipped)
NOTICE: On models equipped with a TPMS, the sensors are located
180° from the valve stem. Use caution when servicing tires.
To avoid damaging a sensor, break the bead at the valve
stem, then at 90° and 270° from the valve stem as required.
With a TPMS, the pressure of each tire can be viewed in the
MFD. If dashes display instead of a pressure value while
traveling above 15 MPH (24 km/h), the system may not be
functioning properly. See your dealer for service.
The TPMS warning indicator will illuminate if low tire
pressure is detected. Always correct low tire pressure
promptly. Always inspect tire pressure and condition before
each ride. See page 70.
The TPMS display may indicate an increase in tire pressure
while riding, a normal occurrence as tires warm up. Riding
into colder conditions may result in a drop in tire pressure as
tires cool down. Regardless of conditions, low tire pressures
should always be corrected promptly.
1
3
2
4
5
6
N
- 2016 INDIAN Chief Vintage 2016 INDIAN Dark Horse 2016 INDIAN Roadmaster 2016 INDIAN Chieftain 2013 INDIAN Chief Classic 2013 INDIAN Chief Vintage 2013 INDIAN Chieftain 2014 INDIAN Chief Classic 2014 INDIAN Chief Vintage 2014 INDIAN Chieftain 2015 INDIAN Chief Classic 2015 INDIAN Chief Vintage 2015 INDIAN Chieftain 2015 INDIAN Roadmaster