Grass Valley PRS 250 RAID Storage System - Manual (Page 63)

Opening and Closing the Fan Module
RAID Instructions 3-17
Opening and Closing the Fan Module
To remove or install an SP or VSC, you must unlock and swing the fan module down
as shown below.
Opening the fan module
CAUTION: To prevent thermal shutdown of the storage chassis, never operate the
storage chassis for more than two minutes with the fan module in the open position.
Closing the fan module
A.Move fan module’s latch
to UNLOCK position.
B.Swing open fan module.
Back of storage chassis
A. Swing fan module closed.
B. Move fan module’s latch to
LOCK position.
Back of storage