Setting storage system date and time, Setting storage system date and time -26 – Grass Valley PRS 250 RAID Storage System User Manual
Page 44
Chapter 2 Installation
2-26
RAID Instructions
Setting Storage System Date and Time
The storage chassis clock controls the date and time displayed on the Presentation
Utility screen and with events recorded in an SP’s unsolicited event log. This clock is
local to the storage chassis, and has no relation to the Profile’s system or boot clock.
To set the storage chassis date and time:
1. From the GridMgr Main Menu, follow this menu path:
Change Parameters
→
Change Storage System Parameters
The Change Storage System Parameters Menu appears, similar to the following.
SP A
SP SCSI ID 1 Change Storage System Parameters Menu
1. View System Memory Configuration
2. Change Main Menu Password
3. Change System Date and Time
At any prompt enter ˆ to GO BACK TO PREVIOUS MENU, ? for HELP
Enter Choice:
9613-1