Grass Valley PRS 250 RAID Storage System - Manual (Page 24)

Chapter 2 Installation
2-6 RAID Instructions
CAUTION: Do not lift the RAID chassis by the handle on the fan module at the
back of the storage chassis or by the disk drive module handles.
5. Mount the storage chassis in the cabinet with the remaining parts in the hardware
mounting kit as shown in the following illustration.
Attaching the storage chassis to the cabinet
6. Reinstall any disk modules that you removed, being sure to put each module back
into its original slot.
Rail
C. Fasten back of chassis to left
and right rails with two screws
(1 per rail).
A. Slide chassis onto rails and
into the cabinet.
B. Fasten front of chassis to
cabinet with four screws
(2perside).