Four-channel pdr200/one dual-sp raid, Four-channel pdr200/one dual-sp raid -20 – Grass Valley PRS 250 RAID Storage System User Manual
Page 38
Chapter 2 Installation
2-20
RAID Instructions
Four-Channel PDR200/One Dual-SP RAID
This configuration, see the following illustration, consists of a four-channel PDR200
(one Master Enhanced Disk Recorder - MEDR, one Slave Enhanced Disk Recorder -
SEDR) connected to a single RAID chassis with two SPs.
1. Connect a SCSI-2 cable from the PDR200 MEDR rear panel connector (SCSI-A)
to the RAID chassis SCSI A IN connector.
2. Connect a SCSI-2 cable from the PDR200 SEDR rear panel connector to the RAID
chassis SCSI B IN connector.
3. Connect a SCSI terminator plug to the RAID chassis SCSI A OUT connector.
4. Connect a SCSI terminator plug to the RAID chassis SCSI B OUT connector.
0226-4
RAID Chassis
4-Channel Profile Disk Recorder
J11 J10
SCSI-2 Terminator
SCSI-2 Cable