Grass Valley PRS 250 RAID Storage System - Manual (Page 11)

RAID Instructions 1-1
Chapter
1
Introduction
This manual explains how to install the rack-mounted RAID Storage chassis, how to
configure and manage the system, and how to replace and/or add customer
replaceable units (CRUs). The manual is for technical personnel who want to install
and maintain the RAID Storage chassis. It assumes familiarity with Profile
Professional Disk Recorders. For information on RAID usage, see the Profile User
Guide.
NOTE: Using the PRS250 RAID Storage chassis requires Profile System Software
V2.2 or higher. For optimum performance from your PRS250, you should use
Profile System Software V2.4.
Organization of the Manual
The manual is organized into chapters which are identified and briefly described
below.
Chapter 1 - Introduction: Introduces the RAID Storage chassis and its components.
Chapter 2 - Installation: Describes how to install and configure the RAID Storage
chassis.
Chapter 3 - Servicing the System: Describes how to monitor and service the RAID
Storage chassis.
Appendix A: Lists the technical specifications of the RAID Storage chassis.
Appendix B: Provides ordering information for CRUs and Field Replaceable Units
for the RAID Storage chassis.