Two-channel profile/single-sp raid, Two-channel profile/single-sp raid -14 – Grass Valley PRS 250 RAID Storage System User Manual
Page 32
Chapter 2 Installation
2-14
RAID Instructions
Two-Channel Profile/Single-SP RAID
This configuration, see the following illustration, consists of a two-channel Profile
disk recorder (one Master Disk Recorder - MDR) connected to a single RAID chassis
with one SP.
1. Connect a SCSI-2 cable from the Profile MDR rear panel connector to the RAID
chassis SCSI A IN connector.
2. Connect a SCSI terminator plug to the RAID chassis SCSI A OUT connector.
0226-1
RAID Chassis
2-Channel Profile Disk Recorder
SCSI-2 Terminator
SCSI-2 Cable
J10
This manual is related to the following products: