Grass Valley PRS 250 RAID Storage System - Manual (Page 40)

Chapter 2 Installation
2-22 RAID Instructions
Powering Up the Storage Chassis
NOTE: When powering up a Profile with RAID system, the RAID unit must be
turned on at least two minutes before power is applied to the Profile.
1. Turn on the storage chassis’s power and wait two minutes.
The green power light on the front of the storage chassis turns on and the fans
rotate.
Turning on storage chassis power
2. Power up the Profile. (See Profile’s Installation manual for information on how to
power up the Profile.)
Back of storage Front of storage chassis